Fujitsu LIFEBOOK LH532 - Device Ports

Settings in BIOS Setup Utility
Exiting BIOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save ch
anges and exit BIOS Setup Utility
► To save the current menu settings and exit the BIOS Setup U tility, select Exit Saving Changes and Yes.

The notebook is rebooted
and the new settings come into effect.
Exit Discarding Changes – Discard changes and
exit BIOS Setup Utility
► To discard the changes, select Exit Discarding Changes and Yes.

The se ttings in place when BIOS Setup U tility was called remain effective. BIOS
Setup Utility is terminated and the notebook is rebooted.
Load Setup Defaul
ts – C opy Standard Entries
► To copy the standard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard C hang es – Discard changes without exiting
the BIOS Setup Utility
► To discard the changes you have made, select D iscard Changes and Yes .

The settings in place when BIOS S etu p U tility w as c alled remain effective.
You can now make additional settings in the BIOS Setu p Utility.
► IfyouwanttoexitBIOS Setup Utilitywith these settings, select Exit Saving Changes and Yes.
Save Chan
ges - save changes without exiting
the BIOS Setup Utility
► To save the c hanges, select Save Changes and Yes.

The changes are saved. You can now make additional settings in the BIOS Setup Utility.
► If you want to exit BIO S Setup Utility with these settings, choo se Exit Saving Changes and Yes.
Save Changes and Power O ff
► To save the changes and switch off your device, select Save Changes and Power Off and Yes.

The changes are saved. Your device is shut down.
60 Fujitsu