First-time setup of your device
Switching on the device for the first time
Switchingonforthefirst time
On devices with ON/OFF switch for wireless components: Slide t he ON/OFF switch
for wireless components to the ON position before switching on the device.
Your de vice is equipped with a O N/O FF switch for wireless components.
When you switch on the device for the first time, the supplied software is
installed and con figured. Because this pro cedure must not be interrupted,
you should se t aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you a re requested to do so!
To make it easier to use
your device for the first time, the operating system
is pre-installed on th
e hard disk.
2
3
1
► Slide the ON/OFF switch for wireless components (1) towards the display to
activate the wireless components for the installation.
► Slide the ON/O F F switch (2) towards the display to switch on the notebook.
The ON/OF F switch returns automatically to its original position.
The power-on indicator (3) flashes.
► During installation, follow the instructions on screen.
Fujitsu Technology Solutions 17