Removing and inst alling components
during servicing
Installing a hard disk
2
2
1
► Place the hard d
isk o n its mo unting location (1).
► Fasten the screws (2).
Finishing component removal
After you ha
ve removed or changed the system components as you required, please
prepare you
r device for operation again as follows:
► Install th
e battery again (see "
Install ing the battery", Page 56).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnec
t the cables that you disconnected before.
Fujitsu Technology Solutions 95
To Next Page
Loading...
