Security functions
Brief overview of security functions
Detailed information about the security equipment of your device can be fo und
in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD
or on our website at "
http://ts.fujitsu .com/support/".
Security functions Type of prote ction
Preparation
Kensington Lock Mechanical Fit and lock Kensington
MicroSaver (accessory)
.
Fingerprint sensor Biometric
Install the supplied fingerprint
software.
BIOS password protection Password protection f or BI OS
Setup, operating s ystem and
hard disk with s uperviso r and
user password. The passwords
consist of a maximum of eight
alphanumeric characters.
Specify at least one supervisor
password in the BIOS Setup
and act ivate the password
protection for the operating
system and hard disk a s
desired.
Boot from rem ovab
le media
Prevents unauthorised booting
of an operating system from
external media (e.g. USB stick,
USB CD-ROM drive etc.).
In the BIOS Setup,
go to the
Security menu and
edit the
option Boot from
Removable
Media.
Owner Information Overlay service desk or owner
information during the boot
process.
In the BIOS Setup, go to the
Security menu and edit the
option O wner Information.
SmartCard reader PIN and SmartCa rd protection
for operating system
Install software e.g. SmartCase
Logon+ (accessories). Specify
a password when using the
SmartCase Logo n+ software.
Trusted Pl
atform Module
(optional
)
Identifica
tion and authentication
of the note
book
Define a sup
ervisor password
in the BIOS
Setup and enable
the TPM (S
ecurity Chip).
66 Fujitsu Technology Solutions
To Next Page
Loading...
