Removing and inst alling components
during servicing
Installing a memory module
2
a
1
► Insert the memory module with the contacts
and the recess (a) facing the slot (1).
MemoryexpansionMemorymodule
► Carefully push the memory module
downwards until you feel it click
into place (2).
Attaching the cover
2
1
► Place the cover into position, following the direction of the arrow (1).
► Fasten the cover with the screw (2).
► Install the battery again (see "
Removing and i nstalling the battery", Page 55).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that were previously disconnected.
Fujitsu Technology Solutions 93
To Next Page
Loading...
