Appendix
Use installation media to reinstall Windows
If you have installation media, like a R ecovery DVD that you purchased from
Fujitsu, you can use it to reinstall Windows. You will need to install additional
drivers a nd applications after reinstalling Windows.
To reinstall Windows, follow the steps below:
1. Power on your system. When the Fujitsu logo appears on the screen, press the
F12
key.
2. Insert the bootable disc in your DVD drive.
3. Highlight the CD/DVD option from the Boot Menu and press
Enter
.
4. Follow the on-screen instructions to restore the image.
• Select the language.
• At the Windows Setup dialog window, enter your OS, language and other
preferences and click Next to continue.
•ClickInstall now to pro cee d with reinstalling Windows.
• At License terms, check on I accept the license terms and click Ne xt.
•AtWhich type of installation do you want,clickonCustom: Install Windows only (advanced).
• Delete all partitions on the drive and click Next. Installation of Window s will start. This will
take some time so please wait until the installation is finished and the system restarts.
5. When the system restarts, perform all set-up steps to arrive at the Desktop.
6. Connect to the Internet.
7. Use the Backup of the contents of the C:\Drivers folder to install needed drivers and
applications to your system. If it is not available, downlo ad the software from the
Fujitsu Support Site, as described below in the "Auto Installation support for the
software downloaded from support website" section below.
Auto Installation support for the software downloaded from support website
1. Download FSDM (Fujitsu Software Download Man ager) from the support site and download all
the drivers applicable to the model and OS using FSDM if they are not downloaded yet.
2. When the software packages are dow nloaded from the web, it is important to
download the Auto Installer So ftware package and the mo del/language-speci fic
Readme file if you prefer to auto install the software.
3. It is important to have the extracted Au to Installer software package folder and
Readme file in the same location as the other software folders. Otherwise
auto-installation of the software will not be supported.
4. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator.
5. Click Yes on the User Ac count Control dialog box. This will take some time to
process the software packages. A messag e will b e displayed d uring this time
stating Please wait while the content is being processed.
6. If the EU LA is displayed for F ujitsu Software Auto Installer, accept the EULA, otherwise continue.
7. The Fujitsu Soft ware Auto Installer user interface will be launched providing the ability
to auto install the software downloaded from the support site.
8. It is recommended that you install all the software in the listed order. You can
Select All, to install the s oftware in the order listed.
9. Click the Install button to start the installation.
10. After installing all the selected drivers, the Installation Results window is displayed. Click OK.
114 Fujitsu
To Next Page
Loading...
