EasyManua.ls Logo

Fujitsu LIFEBOOK U727 - The Notebook Does Not Start after Switching It on; The Notebook Stops Working; The Printer Does Not Print

Fujitsu LIFEBOOK U727
121 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tro ubl eshooting and tips
The notebook d oes not start after switching it on
Notebook
Cause Troubleshooting
The battery is not installed correctly.
Check whether the battery is installed
correctly in its compartment.
Switch the notebook on.
The batte ry is dead.
Charge the battery.
or
Insert a charged battery.
or
Connect the AC adapter to the notebook.
The AC adapter is not connected properly. Check whether the AC adapter is prop erly
connected to the notebook.
Switch the notebook on.
The notebook stops working
NotebookEnding
Cause Troubleshooting
The notebook is in energy saving mo de. End energy saving mode.
An application program has caused the
malfunction.
Close th e application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
The batte ry is dead.
Charge the battery.
or
Insert a charged battery.
or
Connect the AC adapter to the notebook.
The printer does not print
Printerdoesnot print
Cause Troubleshooting
The printer is not switched on. Make sure that t he printer is switched
on and ready for operation (refer to the
documentation s upplied with the printer).
The printer is not connected correctly.
Check that the data cable connecting
the notebook to the printer is properly
connected.
The p
rinter driver is faulty or not correctly
inst
alled, or it is th e wrong printer driver.
Chec
k whether th e correct printer driver is
load
ed (refer to the printer documentation).
Fujitsu 89

Table of Contents

Other manuals for Fujitsu LIFEBOOK U727

Related product manuals