First-time setup of yo ur device
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important note s", Page 21.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and sup plied software are already pre-installed.
Before switching it on for the first time, connect the device to the AC voltage using
the AC adapte r, see "
Connecting the AC adapter" , Page 26. The AC adapter must
remain connected during the whole of the installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time o r may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-tim e se tup process.
When the device is delivered, the battery is located in the battery compartment. T he battery
must be charged if you want to operate your device using the battery.
When used on the mo ve, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the a vailable energy saving functions.
For instructions on how to conn ect external devices (e.g. mouse, printer) to your
device, ple ase refer to the operating manual for your device.
Unpacking and
checking the device
If you find that damage has occurred during transport, please notify
your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your
device for any visible damage which may have occurred during transportation.
You m ay ne
ed to reuse the packaging in the future, for example if
you need t
o ship your device.
Fujitsu 25
To Next Page
Loading...
