First-time s etu p of your device
Choose a location
ChoosealocationSetupAC ada pter
Choose a suitable location for the device before setting it up. In doing
so, please follow these instructions:
• Never place the device o r the AC adapter on a heat-sen sitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air v ents and cause overheating and damage.
• The underside of the de vice heats up during normal operat ion. Prolonged contact
with the skin can become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please n ote that the
rubber feet of the device may mark certain types of delicate s urfaces.
• Keep other objects at least 100 mm / 3.97 inches away from the device
and its AC adapter to ensure adequate ventilation.
• Never cover the ventilation openings of the device.
• Do not expose the device to extreme environmental conditions.
Protect the device against dust, humidity and heat.
Connecting the AC adapter
MakingreadytouseACadapter
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied AC cable conforms to the requirements of the co untry in which
you purchased your device. Make sure that th e AC cable is approved for
use in the country in which you intend to use it.
3
1
2
► Connect the AC cable (1) to the AC adapter.
► Plug the AC cable (2) into a power outlet.
► Connect the AC adapter cable (3) t o the
DC jack socket (DC IN) of the device.
26 Fujitsu
To Next Page
Loading...
