Working with the notebook
Connecting the notebook to the port replicator
The AC adapter must be conn ecte d to the port replicator when the
notebook is connected to the port replicator.
We re commend that the notebook is not operated with the LCD screen closed when
the notebook is connected to the port replicator. The resulting overheating can cause
reduced performance and increased activity of the integrated fan.
Portreplicator
► Disconnect the AC adapter cable from the DC input connector (DC IN) of the notebook.
1
► Position the notebook so th at it is in line with the back edge of the po rt replicator.
► Place the
notebook onto the port replicator (1) and ensure that it locks into place correctly.
52 Fujitsu
To Next Page
Loading...
