Working with t he notebook
Wireless LAN / Bluetooth / wireless components
The installation of wireless components not approved by Fujitsu will
invalidate the certifications issu ed for this device.
Switching the wireless components on and off
► Press the key with the wireless icon (key
F5
) to start the WirelessSelector.
WirelessLANWirelessLANBluetoothBluetooth
The wireless indicator will illuminate when one or m ore wireless components are switched on.
If you switch off the wireless components, the wireless LAN antenna
and the Bluetooth will also be switched off.
You c an activate and deactivate the installed wireless component s
individually using the WirelessSelector program.
Pay attention to the additional safety notes for devices with wireless components
provided in the ""Safety/Regulations" manual.
Details on using a wireless LAN can be found in the online help system
included in the wireless LAN software.
You can find more information on how to use B luetooth on the CD you
received with your Bluetooth software.
Configuring WLAN access
• Requirement: A W LAN is available and you have the ne cessary access data to hand.
Information on configuring WLAN access can be found in the
documentation for your operating system.
Further information on WLAN and Bluetooth
For further information about WLAN or Bluetooth, please refer to the
appendix of this O perating Manual.
For WLAN specifications, see chapter "
WLAN specifications", Page 94.
Fujitsu 49
To Next Page
Loading...
