Fujitsu LIFEBOOK U727 - Installing the M.2 Module; Removing the M.2 Module

Removing and inst alling components
during servicing
Installing the M.2 module
► LIFEBOOK U75 7: If re levant, insert the M.2 adapter in the service compartment.
1
2
► Position the M.2 module in the slot on the mainboard at a slight angle,
in the direction of the arro w (1).
► Secure the W.2 module i n its location with the screw (2).
Removing the M .
2 module
2
1
► Loosen the screw (1).

The M.2 module folds slightly upwards.
► Pull the M.2 module out of the slot on the mainboard in the d irection of
the arrow (2) and remove it from the casing.
► LIFEBOOK U757: If you wish to install an HDD hard disk instead of another M.2 module,
remove the M.2 adapter (under t he M.2 module) from the service compartment and install the
HDD, see "
Removing and installing the hard disk (HDD, LIFEBOOK U757 only)", Page 79.
Fujitsu 77