Connecting external devices
USB port with charging function (USB Type-C)
USBportwithchargingfunction(USBType-C)
At this USB (USB Type-C ) p ort, y ou can charge a connected USB device or operate
devices without an additional power supply (e.g. a monitor or printer).
The USB Type-C c onnector is reversible and both ends of the cable are identical.
This is also possible with the notebook switche d off, if the U SB Type-C Power Delivery
on System Off function is activa ted in the Advanced - Miscellaneous Configurations menu
of the BIOS Setup Utility. Calling up and u sing the BIOS Setup Utility is described
in section "
Settings in BIOS Setup Utility", Page 83.
USB devices are hot-pluggable. This means you can connect and disconnect the
cables of USB devices while the operating system is running.
Additional information can be found in the documentation for the USB devices.
USB 3.1 Gen 1 has a data transfer rate of up to 5 Gbps.
USB 3.1 Gen 2 has a data transfer rate of up to 10 Gbps.
+
► Connect t he data cable to the
external device.
► Connect the data cable to a USB port
(USB Type-C) on the notebook.
Fujitsu 69
To Next Page
Loading...
