xiii
Do not install the scanner on unstable sufaces.
Firmly insert the power plug.
Do not block the ventilation ports.
Do not place heavy objects or climb on top of the scanner.
Before moving the scanner, disconnect the power plug from the
power outlet.
Install the scanner on a desk so that none of its parts protrude
outside of the desktop. Also, make sure that the scanner is installed
on a flat, level surface. Do not install the scanner on unstable
surfaces. Install the scanner on a level surface that is free of
vibration to prevent it from falling.
Install the scanner on a strong surface that will support the weight
of the scanner and other devices.
Firmly insert the power plug into the power outlet as far it can go.
Do not block the ventilation ports. Blocking the ventilation ports
generates heat inside of the scanner, which may results in fire or
scanner failure.
Do not place heavy objects on the scanner or use the scanner’s top
surface for performing other work. Improper installation might cause
injuries.
Do not move the scanner with the power and interface cables
connected as this might damage the cables, causing fire, electric
shock or injuries. Before moving the scanner, be sure to disconnect
the power plug from the power outlet, and disconnect data cables.
Also, make sure that the floor is free of obstructions.
To Next Page
Loading...
Need help?
General