Fujitsu M3093GX User Manual

● 6 - 3
The operation status messages are as follows:
<Power-on>
<Reading>
<Low Power Mode> When the Scanner Display turns Off and the power indicator
remains “On”, the scanner is in the Low Power Mode.
NOTICE
One of the following will wake up the scanner:
• Pressing any button.
• Setting the paper on the ADF.
Sending a command from the host computer.
<Waiting for Start>
(Only When the Video Interface Option is installed.)
The scanner displays the following screen when waiting for the Start
button to be pressed:
<Cleaning request> When the ADF glass cleaning is necessary, the scanner displays
the following on the LCD:
When the Pick roller cleaning is necessary, the scanner displays
the following on the upper line:
When the ADF glass and the Pick roller cleaning are necessary, the
scanner displays the following:
Clean the Pick roller or the ADF glass in accordance with the
manual, “Cleaning and Maintenance”.
W
ar mi n
g
-
up Now!
!
Now
R
e
a d ing!
x
xx x
S
tart
S
W
ON!
Now R
e
a
di ng!
C
lean
A
D
FGlass
Now R
e
a
di ng!
C
lean
P
i
ckrol l e
r
C
l ean
P
i
c k rolle
r
C
l ean
A
D
F G lass
Operation status

Fujitsu M3093GX Specifications

General

Brand	Fujitsu
Model	M3093GX
Category	Scanner
Language	English