Contents
x C156-E205-01EN
3.1.1 Temperature measurement point 3-1
3.1.2 Temperature requirements and measuring method 3-3
3.1.3 Air flow 3-3
3.1.4 Temperature rise under several conditions 3-4
3.1.5 Air purity 3-4
3.2 Mounting Requirements 3-5
3.2.1 External dimensions 3-5
3.2.2 Installation direction 3-8
3.2.3 Centers of gravity 3-9
3.2.4 Notes on mounting 3-10
3.3 Power Supply Requirements 3-12
3.4 Cable Connections 3-13
3.4.1 Drive connectors 3-13
3.4.2 Cable connector specifications 3-14
3.4.3 Drive connection 3-14
3.5 Jumper Settings 3-15
3.5.1 Jumper settings at factory shipping 3-15
3.5.2 Mode setting 3-15
3.6 Notes on Drive Handling 3-18
3.7 Mounting 3-21
3.7.1 Checks before mounting the drive 3-21
3.7.2 Mounting procedure 3-21
3.8 Cable Connections 3-21
3.9 Operation Confirmation and Preparation for Use after Installation 3-22
3.9.1 Confirming initial operations 3-22
3.9.2 Connection check 3-23
3.10 Dismounting Drive 3-23
CHAPTER 4 Host Interface.............................................................................4-1
4.1 Pin Assignment 4-2
4.2 Signal Description 4-4
To Next Page
Loading...
