BX920 S2 Options Guide 23
5 Processors
V CAUTION!
Follow the safety instructions in the chapter "Safety instructions" on
page 15.
V CAUTION!
Processors are modules which can react extremely sensitively to
electrostatic discharges and which must therefore always be handled
with care.
After a processor has been removed from its protective sleeve or from its
socket, place it with its smooth side down on a non-conducting, antistatic
surface.
Never push a processor over a surface.
5.1 Installing a second processor
If only one processor is installed in your server blade, you can upgrade it to
include a second one.
V CAUTION!
● Always use processors of the same type. All processors used must
have the same clock frequency, capacity and organization. For multi-
processor mode use a suitable multi-processor operating system.
Ê Open the server as described in section "Opening the Server Blade" on
page 19.
To Next Page
Loading...
