BX920 S2 Options Guide 67
11 Completion
V CAUTION!
Follow the safety instructions in the chapter "Safety instructions" on
page 15.
11.1 Closing the server blade
Figure 44: Closing the Server Blade
Ê Place the server blade cover on the housing about 1-2 cm from the frame so
that it lies flush on both sides.
Ê Slide the cover forward in the direction of the arrow until it engages.
Ê Insert the server blade in the system unit.
I You insert the server blade in the opposite order to that described in
"Removing the Server Blade from the system unit" on page 19.
To Next Page
Loading...
