BX920 S2 Options Guide 29
6Main memory
V CAUTION!
Follow the safety instructions in the chapter "Safety instructions" on
page 15.
Nine DIMM slots are available for the main memory on the system board of the
server blade. Of these, six slots are assigned to CPU 1 and three slots to CPU 2
(see figure12).
Each slot can be populated with 2 GB, 4 GB, 8 GB or 16 GB single, dual or
quad ranked DIMM memory modules. There is only support for x4 DIMMs with
ECC.
The server blade supports up to 144GB main memory. The minimum memory
configuration is 1 DIMM in Independent Channel Mode.
ECC with memory scrubbing and Single Device Data Correction (SDDC) are
standard.
Memory module population
Figure 12: Main Memory allocation
CPU 1
CPU 2
DIMM 2A
DIMM 1A
DIMM 2B
DIMM 1F
DIMM 1E
DIMM 1D
Front
Channel 2
Channel 1
Channel 0
DIMM 1B
DIMM 1C
DIMM 2C
Channel 0
Channel 1
Channel 2
Slot 1
Slot 0
Slot 0
Slot 0
Slot 0
Slot 1
Slot 0
Slot 0
Slot 1
To Next Page
Loading...
