BX920 S2 Options Guide 65
USB Flash Module (UFM)
10.2 Replacing the UFM board
V CAUTION!
UFM contains customer information (e.g. IP address, License etc.). After
replacing the UFM, you must pass the defective UFM to the customer,
and ask for disposal. If the disposal of the defective UFM is requested by
the customer, you break it according to the following procedure, and
dispose it.
Figure 42: Tools for breaking the UFM
Figure 43: UFM breaking method
Ê Use a long nose pliers and a combination pliers to break the UFM in
half as shown in the figure.
To Next Page
Loading...
