32 Options Guide BX920 S2
Main memory
6.1 Expanding/replacing main memory
Ê Remove the server blade from the system unit and open it as described in
the chapter "Preparation" on page 19.
Figure 14: Removing a memory module
Ê Press the holders on either side of the mounting location concerned outward
(1).
Ê If the mounting location was already equipped: pull the DIMM module out of
the mounting location (2).
Figure 15: Inserting a memory module
Ê Press the holders on either side of the mounting location concerned
outward.
To Next Page
Loading...
