PRIMERGY RX100 S3 User’s Guide

Areas Covered

Before Reading This Manual

This section explains the notes for your safety and conventions used in this manual. Make sure

to read this section.

Chapter 1

Overview

This chapter explains component names and basic operations of this server, as well as an

overview of the software provided with this server. In addition, the workflow, from placing the

server to starting the operation, is also described.

Chapter 2

Checking before OS Installation

This chapter explains the preparation on the server and cautions necessary before OS

installation. Please read this chapter before starting installation.

Chapter3

OS Installation Using ServerStart

This chapter explains how to install the OS in the server using ServerStart.

Chapter4

Manual OS Installation

This chapter explains how to install the OS on the server without using ServerStart.

Chapter5

Operations after OS Installation

This chapter explains the operations to be performed after OS installation. Be sure to perform

those operations before operating the server.

Chapter 6

High Reliability Tools

For stable PRIMERGY server operations, we recommend that high reliability tools be

installed. This chapter explains the installation and necessary settings of high reliability tools.

Chapter 7

Installing Internal Options

This chapter explains how to install internal options on this server.

Chapter 8

Configuring Hardware and Utilities

This chapter explains how to make the environment settings necessary to operate the server.

Chapter 9

Operation and Maintenance

This chapter explains the operations that become necessary after starting to use this server as

well as daily care and maintenance.

Appendix

This appendix explains the specifications for the server and internal options. It also covers

how to recycle the products.

Fujitsu Primergy RX100 S3 - Page 10

Other manuals for Fujitsu Primergy RX100 S3