RX100 S7 Operating Manual 63
Starting up and operation
6.1.1.3 Indicators on the control panel
ID ID indicator (blue)
Lights up blue when the system has been selected by pressing
the ID button. To deactivate, press the button again.
The ID indicator can also be activated via the ServerView
Operations Manager and the iRMC S3 Web interface and its
status reported to the ServerView Operations Manager and the
iRMC S3.
Power-on indicator (green/orange/yellow)
Lights up green when the server is switched ON.
Flashes green when the system is in standby mode.
Lights up orange when the server is in shutdown mode (operating
system shutdown) or is switched off.
Lights up yellow during power on delay.
CSS CSS indicator (yellow)
– Lights up yellow if a prefailure event was detected for a CSS
component that you can fix yourself (for reasons of precaution)
with the CSS concept.
– Flashes yellow if an error was detected that you can fix yourself
with the CSS concept.
– Does not light up when the system is OK.
If the event is still acute after a power failure, the indicator is
activated after the restart.
The indicator also lights up in standby mode.
For more information on the CSS concept, see the PRIMERGY
RX100 S7 Upgrade and Maintenance manual.
Hard disk activity indicator (green)
Lights up green when an internal hard disk drive is accessed.
To Next Page
Loading...
