Fujitsu PRIMERGY RX1330 M4 User Manual

RX1330 M4 Operating Manual 93
Troubleshooting and tips
ODD cannot read data
Cause Troubleshooting
ODD cannot read data Ê Check to see whether the CD/DVD/BD is inserted
properly. If the CD/DVD/BD is not inserted,
correctly insert the disk so that the label is facing
up.
Ê Check to see whether the CD/DVD/BD is not dirty.
If the CD/DVD/BD is dirty, wipe it in a radial way
with a soft, dry cloth.
Ê Check to see whether the CD/DVD/BD is not
scratched or bent. If scratched or damaged,
replace the CD/DVD/BD.

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Chipset	Intel C246
Processor	Intel Pentium, Intel Celeron
Memory Type	DDR4
Memory	Up to 64 GB
Memory Slots	4 DIMM slots
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
Network	2x 1GbE onboard, optional additional NICs
Power Supply	450W
Form Factor	1U
RAID Controller	optional SAS RAID controller