Fujitsu PRIMERGY RX1330 M4 User Manual

96 Operating Manual RX1330 M4
Technical data
Interfaces
USB
(not on 10x HDD/SSD
version)
Rear: 2 x USB 2.0, 2 x USB 3.1 Gen 2
Front: 2 x USB 3.1 Gen 1
Internal: 1 x USB 3.1 Gen 1
USB
(for up to 10
HDDs/SSDs)
Rear: 2 x USB 2.0, 2 x USB 3.1 Gen 2
Front: 1 x USB 2.0
Internal: 1 x USB 3.1 Gen 1
Graphics (15-pin) 1 x VGA (rear), 1 x front VGA (optional)
Serial 1 (9-pin) 1 x serial RS-232-C, usable for iRMC or system or
shared (optional)
LAN / Ethernet 2 x Intel
®
i210 Gbit/s Ethernet
Management LAN
(RJ45)
1 x dedicated management LAN port for iRMC
(10/100/1000 Mbit/s). Management LAN traffic can
be switched to shared onboard converged network
adapter.

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Chipset	Intel C246
Processor	Intel Pentium, Intel Celeron
Memory Type	DDR4
Memory	Up to 64 GB
Memory Slots	4 DIMM slots
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
Network	2x 1GbE onboard, optional additional NICs
Power Supply	450W
Form Factor	1U
RAID Controller	optional SAS RAID controller