RX900 S2 Operating Manual 31
Functional overview
Interfaces
Onboard or integrated controllers
Memory notes Basic configuration includes 4 CPU Memory Risers.
Each expansion includes two additional
CPUMEMRs. CPUMEMRs are populated in four
steps. In each step, four DIMM memory modules are
added. At least four DIMM memory modules must be
installed on CPUMEMR #1 and #2. CPUMEMRs #3
to #8 can be left empty.
Memory module notes Memory modules will be delivered in sets of 4
DIMMs per order code.
Intel 7500 Scalable Memory Buffer called Millbrook
supports max. 1066 MHz memory clock speed.
4 TB memory capacity will be possible with
availability of 32 GB DIMM modules.
USB connectors 9x USB 2.0 (3x front, 4x rear, 1x internal, 1x UFM)
Graphics (15-pin) 2x VGA (1x front, 1x rear)
Serial (9-pin) 1x serial RS-232-C
LAN / Ethernet (RJ-45) 6x Gbit/s Ethernet, 2x 10 Gbit/s Ethernet
Service LAN (RJ45) 1x dedicated service LAN port for iRMC S2 (10/100
Mbit/s); Service LAN traffic can be switched to
shared onboard Gbit LAN port
RAID Controller 8 port SAS RAID 5/6 controller as option
Remote Management
Controller
Integrated Remote Management Controller
(iRMC S2, 128 MB attached memory incl. graphics
controller), IPMI 2.0 compatible
Trusted Platform
Module (TPM)
Infineon / separate module; TCG V1.2 compliant
(option)
To Next Page
Loading...
