54 Operating Manual RX900 S2
Hardware installation
5.1 Unpacking the server
V CAUTION!
Follow the safety instructions in "Important information" on page 39.
The server must always be lifted or carried by at least two people and a
suitable lifter.
(For the Japanese market, please refer to " 安全上の注意およびその他の
重要情報 ".)
Do not unpack the server until it is at its installation location.
Ê Transport the server to the place where you want to set it up.
Ê Unpack all individual parts.
Keep the original packaging in case you want to transport the server again
(applies only to EMEA market).
Ê Check the delivery for any damage during transport.
Ê Check whether the items delivered match the details on the delivery note.
The product name and serial number of the product can be found on the ID card
(see section "ID card" on page 78).
Ê Notify your supplier immediately should you discover that the items
delivered do not correspond to the delivery note.
To Next Page
Loading...
