TX2560 M2 / RX2560 M2
Operating Manual 55
One optional video connector (2) and two additional USB connectors (1) are
located on the front of the server (figure 3 on page 55):
Figure 3: Front side connectors
I If components with large power requirements (e.g. external USB hard
disk drives) are connected simultaneously, these USB connectors may
be switched off.
Connecting the keyboard, mouse and monitor
Ê Connect the monitor, the keyboard and the mouse to the standard ports of
the server (see figure 2 on page 54).
Ê Connect the power cable of the monitor to a grounded mains outlet of the in-
house mains and/or to the mains socket strip of the rack.
V CAUTION!
The rated current for the monitor is indicated on the technical data label
on the monitor or in the operating manual for the monitor.
1 2x USB 3.0 (blue) 2 Video connector (blue)
To Next Page
Loading...
