Fujitsu ScanSnap fi-5110EOXM - Page 62

46
■ [Custom...] button
With this function, you can register up to 5 custom document sizes at the [Paper size:]
menu. Clicking this button displays the following setting window:
<When adding a custom document size>
1) Click the [Add...] button.
2) The following screen appears.
- Enter the document size within the range given below:
Width: 50.8 mm to 216 mm (2 in. to 8.5 in.)
Height: 50.8 mm to 360 mm (2 in. to 14.17 in.)
- Enter the name under [Name:].
⇒ The entered name is displayed in [Paper size:].
3) To complete the setting, click the [OK] button.
4) The custom document size will be registered.
Click [Close] to exit from the "Add or Remove Custom sizes" window.
<When deleting a custom document size>
1) In the "Add or Remove Custom sizes" window, select the document size to be
deleted and click the [Remove] button.
2) The confirmation messsage appears. Click the [Yes] button.
3) In the "Add or Remove Custom sizes" window, confirm that the selected document
size is deleted. Click [Close] to exit from the "Add or Remove Custom sizes"
window.