Fujitsu ScanSnap S510M

5.4 Using the ScanSnap as a Copy Machine
ScanSnap S510M Operator's Guide 131
About Actions
5
Operation
3. Place the mouse cursor on [Scan to Print].
⇒ A description of the [Scan to Print] action is displayed.
4. When you want to change settings for the [Scan to Print] action, place the cursor on
the ( ) mark, and then click the [Settings] button .
(If you want to use default settings, go to Step 6.)
⇒ The following window appears.
In this window, you can change settings for the [Scan to Print] action as follows:
"Save scanned image" checkbox
Printed document images are saved in PDF format.
PDF files are saved in a folder specified in the "Image saving folder" field on the
[Save] tab of the "ScanSnap Manager - Scan and Save Settings" window (page
61).
5. Click the [OK] button to close the "Scan to Print - Options" window.