178
■ Continuing/stopping scanning after an error
If an error such as the paper jam occurs while you scan a document containing more than one
pages, you will see the following message.
You can continue or stop scanning using the following procedure.
Operation
To continue scanning:
1. Check the last scanned page in the "ScanSnap Manager - Message" window.
2. Load the un-scanned pages back onto the ADF.
3. Click the [Continue Scanning] button or press the [SCAN] button on the
ScanSnap to restart the scanning.
To quit scanning:
1. Click the [Quit] button.
⇒ The following window appears.
To Next Page
Loading...
Need help?
General