Fujitsu ScanSnap S510M User Manual

72
■ [Custom] button
Clicking this button displays the "Add or Remove Custom sizes" window. In this win-
dow, you can add, remove, or change custom document size settings selectable from
the [Paper size] pop-up menu.
<When adding a custom document size>
1) Click the [Add] button.
⇒ The following window appears.
2) Configure settings as desired.
- Enter a document size within the range given below:
Width: 50.8 mm to 216 mm (2 in. to 8.5 in.)
Length: 50.8 mm to 360 mm (2 in. to 14.17 in.)
- Enter the name you want to use in the "Name" field.
3) To complete the setting, click the [OK] button.
⇒ The custom document size will be added.
4) Click the [Close] button to close the "Add or Remove Custom sizes" window.
⇒ The entered name is displayed in the [Paper size] pop-up menu.

Fujitsu ScanSnap S510M Specifications

General

Brand	Fujitsu
Model	ScanSnap S510M
Category	Scanner
Language	English