System expansions
A26361-K523-Z100-6-7619 39
a
1
3
2
1
Ê Push the cover plate into the slot (1). Ensure that the end of the cover engages into the guide
(a).
Ê Replace the clip (3), which fixes the board. Make sure that the clip engages when released (2).
Ê Close the casing (see "Closing the casing“).
i
If you have installed or removed a PCI board, check the relevant PCI slot settings in the
BIOS-Setup and change where necessary. Further information is provided in the PCI board
documentation.
To Next Page
Loading...
