System expansions
48 A26361-K523-Z100-6-7619
2
Ê Place the drive cage into the casing and push it towards the front (1). When doing so, be sure
to place the drive cage correctly into the guide rails.
Ê Fix the drive cage with the screw (2).
Ê Fit the data and the power supply connectors to the drive and to the system board.
Ê Close the casing (see "Closing the casing“).
i
You may have to check the entry for the drive in the BIOS Setup.
Removing an accessible drive
Ê Open the casing (see "Opening the casing“).
1
1
2
Ê Push the front panel out (1) from the inside.
Ê Pull the front panel up and out (2).
To Next Page
Loading...
