ETERNUS LT40 S2 tape library Periphery
40 U41861-J-Z126-1-76
Numerical values
Numerical values are needed for network addresses, PIN entries, and other configuration
entries. After navigating to the menu item to be changed, the actual value will be displayed
and the cursor stays on the first digit. The value may be incremented / decremented with
the UP and DOWN button. After pressing the ENTER button the cursor is set to the next
editable digit. It can be changed in the same way. After pressing the ENTER button at the
last digit the complete entry will be stored. Pressing the CANCEL button will cancel the
whole edit process and the old value is valid again.
OCP menu flowcharts
You will find the menu tree overview in other languages in the language options of the
"ETERNUS LT40 S2 Quick Start Guide" available for downloading from the following
website: http://www.fujitsu.com/uk:
Ê Go to Support → Computing Products → Storage → ETERNUS, select ETERNUS LT40
S2 and then the manuals heading.
To Next Page
Loading...
Need help?
General