Fujitsu SPARC Enterprise M3000

C120-E360-06EN v
Preface
1 Message
Global Site
http://www.fujitsu.com/sparcenterprise/msg/
Japanese Site
http://primeserver.fujitsu.com/sparcenterprise/msg/
2 Firmware program
You can download the latest files of firmware at the following websites.
Global Site
http://www.fujitsu.com/sparcenterprise/firmware/
Japanese Site
http://primeserver.fujitsu.com/sparcenterprise/download/
firmware/
The following files or document are provided.
• Firmware program file (XSCF Control Package (XCP) file)
• XSCF extension MIB definition file
Note: XSCF Control Package (XCP) : XCP is a package which has the control
programs of hardware that configures a computing system. The XSCF
firmware and the OpenBoot
TM
PROM firmware are included in the XCP
file.
3 Fault Management MIB (SUN-FM-MIB) definition file
http://src.opensolaris.org/source/xref/onnv/onnv-gate/
usr/src/lib/fm/libfmd_snmp/mibs/
6 Solaris Operating System Related Manuals
http://docs.sun.com
7 Provided In firmware program CD (For maintenance service <for FEs>)
• Firmware program file (XSCF Control Package (XCP) file)
• XSCF extension MIB definition file
8 Information on Using the RCI function
The manual does not contain an explanation of the RCI build procedure. For
information on using the RCI function, refer to the SPARC Enterprise M3000/
M4000/M5000/M8000/M9000 Servers RCI Build Procedure available on the
website.