C120-E360-06EN 3-7
3.1 setrci
EXAMPLE 2: Makes the first RCI setting on the first host in an M8000/M9000
server.
•EXIT STATUS
The following exit values are returned:
XSCF> setrci -c init
..........
The command completed successfully.
XSCF> setrci -c set 1
..........
The command completed successfully.
XSCF> setrci -c initconfig
..........
The command completed successfully.
XSCF> setrci -c stat
RCI-0
HOST
address 000101ff
Active
LIST
address pwr alm I/F sys-phase ctgry dev-cls sub-cls tm-out
000101ff ON - ACT - host 0001 0b -
003001ff ON - ACT - disk 0400 10s -
The command completed successfully.
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
