4-2 C120-E360-06EN
CHAPTER 4 Error Status
4.2 setrcic error status
When the RCI construction by the setrcic command ends abnormally and "Operation
failed error status: XX" is displayed, the displayed error status code and explanation
are described to the following table.
Code Explanation
-1 Detected an RCI transmission error.
-2
Terminated the command execution due to RCI busy. (Note 1)
-3
Internal error occurred in XSCF. (Note 2)
Note 1: After a certain period of time, re-execute the setrcic command. When this case
reappears, please contact our field engineer.
Note 2: Please contact our field engineer.
To Next Page
Loading...
Need help?
General