C120-E360-06EN i
Preface
1
This manual describes the Remote Cabinet Interface (RCI) function on SPARC
®
Enterprise series servers. This manual is intended for users, specifically system
management/maintenance administrators. However, when carrying out actual
operations, authorized service personnels do it.
Be sure to also read the SPARC Enterprise M3000/M4000/M5000/M8000/M9000
Servers XSCF User’s Guide and other manuals referenced in this manual.
This section includes:
z Audience
z Glossary
z Structure and Contents of this Manual
z SPARC Enterprise Mx000 Servers Documentation
z Abbreviated References to Other Documents
z Models
z Text Conventions
z Prompt Notations
z Syntax of the Command-Line Interface (CLI)
z Fujitsu Welcomes Your Comments
Audience
This manual is intended for users, specifically SPARC Enterprise system
management/maintenance administrators. Moreover, the system administrator is
required to have the following knowledge:
-Solaris
TM
Operating System (Solaris OS) and Unix command
- SPARC Enterprise system and basic knowledge of XSCF
Glossary
For the terms used in the "SPARC Enterprise Mx000 Servers Documentation", refer
to the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Glossary.
Structure and Contents of this Manual
This manual is organized as described below:
To Next Page
Loading...
