xiv SPARC Enterprise M4000/M5000 Servers Overview Guide • August 2009
Syntax of the Command-Line Interface
(CLI)
The command syntax is as follows:
■ A variable that requires input of a value must be enclosed in <>.
■ An optional element must be enclosed in [ ].
■ A group of options for an optional keyword must be enclosed in [ ] and delimited
by |.
■ A group of options for a mandatory keyword must be enclosed in {} and
delimited by |.
■ The command syntax is shown in a box.
Example:
Environment Requirements for Using
This Product
This product is a computer that is intended to be used in a computer room.
For details on the operational environment, see the SPARC Enterprise M4000/M5000
Servers Site Planning Guide.
Conventions for Alert Messages
This manual uses the following conventions to show alert messages, which are
intended to prevent injury to the user or bystanders as well as property damage, and
important messages that are useful to the user.
TABLE 0-1
XSCF> showuser -a
To Next Page
Loading...
Need help?
General