1-30 SPARC Enterprise M4000/M5000 Servers Overview Guide • August 2009
1.3.9.1 CD-RW/DVD-RW Drive Unit
TABLE 1-11 lists the features, location, and specifications of the CD-RW/DVD-RW
drive unit.
The Advanced Technology Attachment Packet Interface (ATAPI) is an interface
between the server and the CD-RW/DVD-RW drive unit.
1.3.9.2 Hard Disk Drive
The hard disk drives are located on the front of the midrange server. The SAS
interface on the hard disk drive allows a fast data transmission rate.
1.3.9.3 Tape Drive Unit
The tape drive unit in both midrange servers is an optional component. TABLE 1-12
lists the features, location, and specifications of the optional tape drive unit.
Contact your sales representative for tape drive unit options on SPARC Enterprise
M4000/M5000 servers.
TABLE 1-11 CD-RW/DVD-RW Drive Unit Features and Specifications for Both Servers
Number of CD-RW/DVD-RW drive unit 1
Location Front of server to the right of the disk drives
Hot FRU replacement No
TABLE 1-12 Tape Drive Unit Features and Specifications for Both Midrange Servers
Feature Quantity, Location, and Specifications
Number of tape drive units 1 (optional)
Location Front of server
Cold FRU replacement capability Yes
Tape drive unit type Digital audio tape (DAT) drive
Data transfer rate About 6 MB/s
Capacity 36 Gbytes of data (non compressed format)
72 Gbytes of data (double-compressed format)
Media type Sequential access
Transfer rate 150 MB/s or faster
To Next Page
Loading...
Need help?
General