Security functions
Assigning the supervisor and user passwords
► Start the BIOS Se tup Utility and go to the Security menu.
► Select the Set Supervisor Password field and press the Enter key.
With Enter new Password: you are asked to enter a password.
► Enter the password and press the Enter key.
Confirm ne w Password requires you to confirm the passw ord.
► Enter the password again and press the Enter key.
Changes have been saved is displayed as a confirmation that the new password has been saved.
► To set th e user password, select Set User Password and proceed exactly as
when configuring the supervisor password.
If you d o not want to change any other settings, you can exit BIOS Setup Utility.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
PasswordSupervisor passwor
d
Userpassword
The Tablet PC is rebooted and the new password is effective. It will now be necessary to
first e nter your supervisor or user password in order to open the BIOS Setup Utility. Please
note that the user password only provides access to a few of the BIO S settings.
Changing the supervisor password or user password
You can only change the supervisor password when you have logg ed into the
BIOS Setup Utility with the s upervisor p assword.
PasswordSupervisorpasswordUserpassword
► Start the BIOS Se tup Utility and go to the Security menu.
► When cha nging the password, proceed exactly as when assigning a password.
Removing passwords
To remove a password ( without setting a new passwo rd) perform the following steps:
PasswordSupervisor
password
Userpasswo
rd
► Start the BIOS Se tup Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and press the Enter key.
You will be r equested to enter the current password by the Enter Current Password prompt.
Enter New Password will appea r and you will be requeste d to enter a new password.
► Press the Enter key twice at this request.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
The Tablet PC is rebooted and the password is remove d.
Removing the supervisor password simultaneously deactiva tes the user password.
64 Fujitsu
To Next Page
Loading...
Need help?
General