What to do if the printer does not print from my Fujitsu Stylistic Q572 Tablet?
First, make sure that the printer is switched on and ready for operation. Next, check that the data cable connecting the Tablet PC to the printer is properly connected. Finally, verify that the correct printer driver is loaded and properly installed, referring to the printer documentation for guidance.
How to resolve cursor movement issues with the pen on my Fujitsu Stylistic Q572?
If the cursor does not correctly follow the pen movements on your Fujitsu Tablet, the pen might be incorrectly calibrated. Calibrate the pen as described in chapters "Setting the pen", Page 32 and "Calibrating the pen", Page 32.
Why does my Fujitsu Tablet battery discharge too quickly?
Your Fujitsu Tablet battery might be draining quickly due to several reasons. It could be too hot or too cold (the battery indicator will flash in this case); try to bring the Tablet PC to a normal temperature. A demanding application may be consuming excessive power by frequently accessing the hard disk or optical drive; use the mains adapter as often as possible. The screen brightness might be set to maximum; reduce the brightness via Control Panel – Hardware and Sounds – Windows Mobility Center.
What should I do if my Fujitsu Stylistic Q572 SmartCard reader is not recognized?
If your Fujitsu Tablet's SmartCard reader is not recognized, make sure you have inserted your SmartCard into the SmartCard reader with the chip facing upwards. Also, check whether the SmartCard you are using is supported and complies with the ISO standard 7816-1, -2, -3 and -4.
What to do if I forgot my Fujitsu Tablet SmartCard PIN?
If you work in a network, contact your system administrator, who can unlock your Fujitsu Tablet PC with a supervisor PIN.
What to do if I lost my Fujitsu Tablet User and/or supervisor SmartCard?
If you have lost your User SmartCard, you can continue working with the Supervisor SmartCard and initialise a new User SmartCard or deactivate the SystemLock function. If you have lost the Supervisor SmartCard, you can continue working, but you no longer have all your rights and can no longer initialise a Supervisor SmartCard. If you have lost both SmartCards, you can no longer boot your system. Please contact our Service Desk. You must provide proof of ownership for the device. Then the Service Desk will refer you to our service partner, who will unlock your device (for a charge).
Why does my Fujitsu Tablet beep every few seconds?
The beeping sound every few seconds indicates that the battery is almost flat. Charge the battery.
How to fix 'System CMOS checksum bad - default configuration used' error on Fujitsu Stylistic Q572?
To fix the 'System CMOS checksum bad' error on your Fujitsu Tablet, switch off the Tablet PC, then switch it back on. Keep the tablet button pressed while switching the Tablet PC on. In the BIOS Setup, select the Exit menu, then select 'Load Setup Defaults'. Choose 'OK' and press the Enter key.
What to do if my Fujitsu Stylistic Q572 Tablet PC’s date or time is incorrect?
With the BIOS-Setup-Utility, you can set the date and time in the main menu.
How do I resolve a 'Failure Fixed Disk n' error on my Fujitsu Stylistic Q572?
Start the BIOS Setup (Primary Master submenu) and select the correct settings.
General| Display Size | 10.1 inches |
|---|---|
| Display Resolution | 1920 x 1200 pixels |
| Processor | AMD T56N Dual Core 1.65 GHz |
| Operating System | Windows 7 Professional |
| Weight | 820 g |
| Battery Life | Up to 10 hours |
| Storage | 32 GB / 64 GB |
| Camera | 8 MP rear, 2 MP front |
| Connectivity | Wi-Fi, Bluetooth |
| Ports | headphone jack |
| Additional Features | Stylus support |
Details the location and function of various ports, buttons, and sensors on the tablet.
Covers using the stylus, touch gestures, and screen calibration for input.
Details the primary Lithium Polymer battery, AC adapter, and Auto/Airline adapter.
Provides instructions for connecting the AC adapter and optional Auto/Airline adapter.
Guides through the initial power-on process, including the Power/Suspend/Resume switch.
Information on the battery's durability, operating conditions, and replacement.
General steps to identify and resolve common setup and operating problems.
Procedures for creating backups and restoring system images or factory settings.
Addresses common issues with wireless LAN connectivity and provides solutions.
To Next Page
