Working with the Tablet PC
Access via UMTS
If you ordered an integrated UMTS module with your system, you can enjoy optimum
reception and maximum energy efficiency without awkward cables or antennas. The
optional UM TS module is ready for use immediately.
You will fi nd information on establishing the connection with the UMTS network
in the documentation for the hardware used.
Your device can connect to the Internet via UMTS. To do this, use one of
the following types of con nect ion:
• Integrated UMTS module (availability dependent on your configuration)
• USB dongle (a USB stick containing a SIM card from yo ur cellular phone network provider)
• A mo bile end-device (e.g. cellular phone with Bluetooth or cable connection)
Access via Wireless WAN
You can purchase the
accessories for Wireless WAN reception from your Fujitsu dealer.
If you have ordered
a Wireless WAN module, your device will already
be prepared when yo
u receive it.
You will find inform
ation on establishing the connection with the Wireless WAN
network in the doc
umentation for the hardware you plan to use.
Access via 4G
You can order the accessories for 4G reception from your Fujitsu dealer.
If you have ordered an integra ted 4G module with your system, the 4G
module is ready for use straight away.
You can find information on establishing the connection with the 4G network
in the documentation for the hardware used.
NFC (Near F ield Communication, optional)
Your Table
t PC can be equipped with an optional built-in NFC chip. Ne ar Field Communication is
used for c
ontactless exchange of data via radio over short distances (a few centimeters).
38 Fujitsu
To Next Page
Loading...
Need help?
General