Security functions
Activating hard disk protection
► Call up the BIOS Setup and select the Security menu.
If you have not assigned BIOS passwords yet, define the supervisor and the user
password now, if d esired (see "
Securit y functions", Page 64).
► Mark the Hard Disk Security field and press the Enter key.
► In the area Drive0, mark the field Set M aster P assword and press the Enter key.
Enter n ew Password then appears and you are asked to enter a password.
► Enter the password and press the Ente r key.
Confirm new Password requires you to confirm the password.
► Enter the password again and press the Enter key.
With Setup Notice: Changes have been saved you receive confirmation that
the new password has been saved.
► If you wish to enter a password for a second hard d isk (Drive1), in the area
Drive1 mark the field Set Master Password and pro ceed in exactly the same way
as for the set up of the first hard disk (Drive0 ).
The field Password Entry on Boot is set to Enabled by default. You can exit the BIOS
Setup once you have finished changing the settings.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.
The Tablet PC reboots and your hard disk is now protected with a password. The
password prompt is enab led as soon as the Tablet PC has rebooted.
Deactivating hard disk protection
To cancel a password ( without setting a new password) proceed as follows:
► Call up the BIOS Setup and select the Security menu.
► Mark the Hard Disk Security field and press the Enter key.
► In the area Drive0, mark the field Set M aster P assword and press the Enter key.
With the pro m pt Enter current Password you are first asked to enter the old password again.
With Enter new P assword you are then prompted to enter a n ew password.
► After the request, pre ss the Enter key three times.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.
The Tablet PC reboots and there is no longer an y password protection for this hard disk.
► If you wish to remove a password for a second hard disk (Drive1 ), in the area
Drive1 mark the field Set Master Password and pro ceed in exactly the same way
as for the removal of the first hard disk (Drive0).
Fujitsu 71
To Next Page
Loading...
Need help?
General