© The Fulton Companies 2013
MAINTENANCE PHW-IOM-2013-0214 SECTION 4
4-4
4 CAUTION
All information in this manual is for
reference and guidance purposes,
and does not substitute for required
professional training, conduct,
and strict adherence to applicable
jurisdictional/professional codes and
regulations.
All maintenance procedures should
be completed by trained personnel.
Appropriate training and instructions
are available from the Fulton Service
Department at (315) 298-5121 or your
local Fulton Representative.
In order to meet warranty conditions,
ensure all appropriate maintenance
activities are performed.
After All Repairs and Maintenance
1. Follow “Pre-Start Check List” provided with the unit, and all Safety Checks.
2. Fire the Boiler and perform combustion check.
3. Make any necessary adjustments.
FIGURE 53 - PULSE SPARK PLUG
FIGURE 54 - PULSE MAINTENANCE
To Next Page
Loading...
