EVO EXPERT Manual 23/105
Select the ‘VISCOSITY’ option and you will access to the following screens, depending on the model
of your viscometer:
Model L
Models R and H
Upon entering this screen, the spindle field is highlighted in light blue background. Using the ‘’ and
‘’ keys you can change the Spindle.
The list of possible spindles to use depends on the model of your viscometer (L, R or H). Thus, in
tables 8 through 17 (page 62 and on) you can see the different spindles available for each model.
Note: It is recommended to use the following combinations of Spindle and standard
oil depending on the viscometer model:
Model L: TL5 Spindle (LCP adapter) and RT-50 (50 cP) standard
Model R: TR8 Spindle (LCP adapter) and RT-500 (500 cP) standard
Model H: TR8 Spindle (LCP adapter) and RT-500 (500 cP) standard
Once you’ve selected your spindle press ‘ENTER’ and the ‘VISCOSITY’ field will be highlighted. Press
‘ENTER’ again and the following screen will appear:
To Next Page
Loading...
