40
|
41
Software update
The software for your EGO FLASH can be updated via Bluetooth
®
. For more details, please see the section “Software
update”.
Info
Provides information about the various software and hardware versions of your EGO FLASH. Use this information when
you contact our service department with questions and problems.
Language
The EGO FLASH supports multiple display languages. You can change the display language within this menu item.
Voice control
→ Start
Carrying out this item launches voice control. Control is performed with specifi c commands. For more
information see the “Voice control” chapter.
→ Recognition language
If your EGO FLASH features multiple languages, you may select the language here.
Audio management
→ Microphone sensitivity
In some circumstances, such as when the microphone is located very far from or very near to the driver, it may
be necessary to adjust microphone sensitivity. There are 10 possible levels of sensitivity that may be selected
for the EGO FLASH. The sensitivity is shown to the right of the display as a bar. A total of 5 bars can be seen,
whereby each bar has two levels. Sensitivity can be adjusted with the , keys. Do not set the microphone
at too high a level of sensitivity, as this can lead to overamplifi cation and poor audio quality for the person you are
speaking with.
→ Line in
In this menu item, you may activate the line in and vary the input volume of the audio device connected to the line
in of the electronics box.
To Next Page
Loading...
Need help?
General
