Funkwerk EGO FLASH - Voice Control

42
|
43
button. The EGO FLASH will now save your settings and will begin updating the recognition language. The status
of this process will be displayed with a progress bar.
Activation and sequence
Voice control is only possible when there is no phone call in progress. If under these circumstances the key is
pressed for longer than a half-second, the “Main menu” standby text sounds, and the display shows the announcement,
“Please begin speaking …”.
You may cancel each voice dialogue at almost any time with another prolonged pressing of the key. If the EGO
FLASH is waiting for a voice command, you may end the dialogue by saying “abort”.
If there is no Bluetooth
®
phone connected to the EGO FLASH, voice-activated dialing cannot be activated.
The following voice commands are possible:
→ “Call / dial <name>”
→ “Call <name> at home / at private number…
at work / in the offi ce / on business …
mobile / on the mobile phone / in transit …
→ “Dial number”
→ “Show (number / name) dialed”
→ “Show missed calls”
→ “Show accepted calls”
→ “Save (memo / note)”
→ “Listen to (memos / notes)”
→ “Help”
→ “Last number redial”
→ “Abort”
“Call / Dial <name>”
This command may be used to select a name from the contacts list. The name must be contained in the contacts list
for this command to function. If the name is not recognized or found, the EGO FLASH responds with “Please repeat”