Note: Please note that only the connection of an audio device with line level is allowed. If the electronics box’s line in is
overamplifi ed through an excessively high signal from the line out of the audio device, the volume must be reduced on
the audio device.
→ Volume
The base volume of the line out as well as the ringtone and call playback through the speaker output of the
electronics box can be adjusted within this menu item in 5 steps.
→ Line out
The channel for call playback can be set under this menu item. The items “right”, “left”, and “right + left”
are available.
Voicemail
Voicemail functions can be switched on and off here. The user still has the option to record and listen to messages and
to playback recordings. For more information see the “Voicemail” chapter.
Switch off
The current Bluetooth
®
connection is severed under this item and the EGO FLASH is switched off. The EGO FLASH may
be switched back on by pressing a single key.
7.5.10 Voice control
The dialogue-guided voice control of the EGO FLASH allows you to select a name or number via voice input. While
numerical selection allows you to directly announce a number, you also have the option to select the name directly from
the contacts list.
Switch recognition language
Depending on the national version of your EGO FLASH, voice recognition supports up to 3 languages, one of which is
activated. To switch the active recognition language, within the menu, select “Setting → Voice control → Recognition
language”. A list of available languages is now displayed. Select the desired language and confirm it by pressing the
EGO FLASH
q
To Next Page
Loading...
Need help?
General
